## ISO file mount 1. Prepare the ISO file. 2. Copy the ISO file to the IODD disk. 3. safe removal And Reconnect. or **[Push** `**1**` **key 3s]** 4. Select the ISO file from the IODD screen.**[Push** `**6**` **or** `**Enter**` **Key]** _If it is mounted normally, you can see that the virtual drive is recognized on the desktop or in the Finder._ 5. **Saves the current mounted state**. Reconnecting will bring up the virtual drive in its current saved state.**[** `**9**` **Key]** 6. **If the installation does not require booting**, double-click the virtual drive or autorun as it is to execute the operation. 7. **If you need to boot from a virtual drive**, continue with the item below.[CMOS/BIOS Boot order Setting](https://help.iodd.kr/bootable-virtual-drive/virtual-odd-iso#cmos-bios-boot-order-setting) If the file is not visible, try selecting another partition by pressing and **holding the** `**4**` **key (partition selection).** **If Virtual Drive is not enabled**, please refer to the section below to enable Virtual ODD[Mode Configuration](https://help.iodd.kr/bootable-virtual-drive/mode-configuration) https://help.iodd.kr/bootable-virtual-drive/virtual-odd-iso